MX series
VX series main features
HIGH PERFORMANCES: high flow rates or pressure performances
WALL MOUNTING HOUSING: die cast aluminium housing coated with anti-corrosive epoxy paint
- Stroke frequency adjustment 120 impulses / minute
- Ceramic ball check valves
- Reed “LIP” valve types for performance 05-20
- Standard hose O 10 x 14 mm
- Die-cast aluminium housing / IP65 rating
- Epoxy anti-acid coating
- PTFE diaphragm
- Level control setting
- Standard accessories
VX technical characteristics
| Pump type range | Max Flow / Max Pressure | Stroke Length (mm) | Output cc(ml) /stroke | Pump head type | Hose size (mm) | Max suction (m) | Max stroke freq | Power/Current consumption | |
|---|---|---|---|---|---|---|---|---|---|
| l/h | bar | ||||||||
| VX 05-20 | 5 | 20 | 1,5 | 0,52 | PVC20b3/8″ | 4×6 | 2,0 | 160/min | 115 watts/0,48A |
| VX 10-10* | 10 | 10 | 1,1 | 1,04 | PP 3/8″ | 4×6 | 2,0 | 160/min | 93 watts/0,39A |
| VX 20-05 | 20 | 5 | 2,2 | 2,08 | PP20L 3/8″ | 4×6 | 2,0 | 160/min | 111 watts/0,48A |
| VX 30-04 | 30 | 4 | 1,4 | 2,80 | PVC 1/2″ | 10×14 | 1,5 | 180/min | 124 watts/0,54A |
| VX 50-03 | 50 | 3 | 1,7 | 4,60 | PVC 1/2″ | 10×14 | 1,5 | 180/min | 124 watts/0,54A |
| VX 80-01 | 80 | 1 | 2,4 | 7,40 | PVC 1/2″ | 10×14 | 1,5 | 180/min | 124 watts/0,54A |
| Hose size: 10 x 14 mm | Max suction lift: 2 m | ||||||||
| Power supply: 230Vac-single phase 50-60 Hz | AVAILABLE: 110 Vac – single phase 60 Hz | ||||||||
VX liquid ends
| WETTED PARTS | STANDARD VERSION | UPON REQUEST |
|---|---|---|
| Pump head | PP MEMO 1 – MEMO 2 | PVDF; PMMA MEMO 3 / NOTE; AISI 316 |
| Ball check valvepe check valve | CERAMIC | AISI 316 |
| Diaphragm | PTFE | —— |
| Pump head Nipples / Hose Nut | PP | PVDF |
| Seals / O-rings | FPM | EPDM |
| Injection Fitting | PP | PVDF |
| Injection No-Return Valve (sleeve type) | FPM | EPDM |
| Foot Valve Lip type | FPM | EPDM |
| Filter body / Fitting-Nipple / Filtering media | PE / PP / Glasswool | PVDF |
| Suction Hose/Air Bleed hose 10x14mm | PVC flexible | PVDF; PTFE |
| Discharge Hose 10x14mm | PE semi- flexible | PVDF; PTFE |
| OTHER OPTIONS AND SPECIAL CONFIGURATIONS UPON REQUEST: | ||
| Reed type “Lip” valve | CERAMIC / PP | CERAMIC / PVDF |
| Ball check Injection and Foot Valves / Fitting | CERAMIC / PP | CERAMIC / PVDF |
| PVDF Spring Injection ball Valve / Fitting MEMO 4 | PVDF spring / CERAMIC / PP | PVDF spring / CERAMIC / PVDF |
| Automatic autobleed pump head | PVDF AUTO BLEED NOTE | —— |
| Aggressive chemicals configuration | PVDF acid configuration MEMO 4 | —— |
MEMO 1: pump head type 03-20 and 22-02 do not feature air bleed valve.
MEMO 2: type 03-20 mounts PVC pump headls FPM (EPDM or PTFE), Foot and Injection no-return valve PVDF spring / Ceramic ball check, PVDF suction/discharge hoses.
MEMO 3: polymer viscous liquid configuration PMMA pump head, Ceramic ball checks (O11), Fittings PP 3/4”, o-rings/seals FPM or EPDM, Injection fitting and Strainer (without no- return valve), hoses PVC flexible 10×14.
MEMO 4: available only for 10-10 and 20-05 types.
MEMO 5: aggressive chemical configuration PVDF pump head/fittings, double Ceramic ball check valves, o-rings/seals FPM (EPDM or PTFE), Foot and Injection no-return valve PVDF spring / Ceramic ball check, PVDF suction/discharge hoses.
NOTE: Using AUTO-BLEED and Polymer PMMA configuration, pump pressure performance decreases of about 50%.
Models / dosing modes
Constant-ON/OFF mode - Analog controls
CONSTANT — ON/OFF pumps for those application where a simple pump at low cost is required but keeping maximum reliability. Pump flow rate is obtained by adjusting pulse frequency percentage (%). It also features reduction frequency scale range 1/5 reducing range from 100% to 20%. Available 12—24Vdc (limited flow rate range).
C/A
- Constant flow rate / ON-OFF mode (also called Manual mode).
- Strokes frequency adjustment 0 / 100%.
- Frequency reduction ratio 100% / 20%.
- Analog controls.
- 2 LED display status: power and pulses.
Multifunction dosing mode pump
MF/D
- Multifunction dosing pumps including most dosing operations modes.
- Microcontroller technology, display LCD and digital controls.
- Strokes frequency adjustment 0÷100%.
- Proportional to external digital pulses: divider n : 1; multiplier 1xN.
- Proportional to external analog signal 0…4 mA÷20mA or reverse.
- PPM dosing mode
- Constant mode with digital adjustment: imp/min; imp/hour; imp/day.
- Digital timer, weekly and daily programming.
- Sequence strokes/ injection with flow sensor (sensor on request).
- Level alarm output contact: NO/NC.
- Level control (Level switch upon request).
- Available with double level control.
- Available 12-24Vdc (limited flow rate range).